Field installation, commissioning and training, Engineers available to service machinery overseas
tire retreading equipment
Carbon Steel Q345R
temperature control auto
100 Set/Sets per Month tire retreading equipment
Packaging & Delivery
suitable for transportation by sea
Tire Retreading Equipment
Melion Retreading Technology:
Melion Precure or "Cold" retreading involves vulcanization without a mould at a temperature of between 95 °C and 117 °C. The tyre is put together using a pre-vulcanized Tread Liner Rubber (= new tread) and a non-vulcanized Bonding Gum(Cushion Gum) layer. The bond between the carcass, the bonding gum and the precured tread is created in an autoclave(Curing Chamber). Precure retreading has become fully established in the truck tyres sector since the introduction of radial tyres in the mid-1960s.
Melion Full Set Tire Retreading Equipment Initial Inspection Machine, Tire Buffing Machine,Dust Collector, Multi-functional Repair Stand, Extruder Machine, Cement Mixing Tank, Building Machine,Envelope Spreader,Rims Mounting Machine,Monorail,Curing Chamber,Pressure Test Machine etc.
Initial Inspection Machine
Every single tire casing will receive a thorough inspection identifying potential defects.Using Melion multiple methods to inspect tires for defects and ensure only high quality casings to be retreaded.If repairs are needed, they are administered after inspection.
Tire Retreading Buffing Machine
The tire’s old tread is mechanically removed on high speed buffers.Melion's buffers are extremely accurate and will remove the proper amount of old rubber while turning the tire to an exact specified diameter and radius.
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to “fill” the injury. This would create a permanent repair that maximizes tyre life.
Multifunctional Repair Stand
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to “fill” the injury. This would create a permanent repair that maximizes tyre life.0
Tread Building Machine
In the Pre-cure Tire Retreading System, the Tread Rubber has already been vulcanized with the new tread pattern design. The buffed tire needs a thin layer of cushion gum to be wrapped around its crown area. The Pre-cured Tread Rubber(PTR) is then applied with the building machine. This is called the MELION Building Process.
Tire Retreading Equipment -Envelope Spreader
Operate the air cylinder and drive the Spreading Arms outwards to spread the Envelope. Then open the Gripper and grip the bead, and then lift the tire up with the cylinder-driven cable wire and guiding pulley. Rotate the lifting arm and lower the tire into the center of the Spreading Arms, and put it into the envelop. Manipulate the Air Cylinder to retrieve the Spreading Arms and release the Spreading Pads off the Envelop. Then lift the tire out of the Spreader.
Tire Retreading Equipment-Rims Mounting Machine
In the Pre-cure Tire Retreading System, this Rims Mounting Machine is used to Mounting and Demounting the Curing Rims & Ring Plate for Enveloped Tires.
Tire Retreading Equipment-Curing Chamber
Capacity of Tires
More Curing Chamber OEM Design Available up to Giant Tire 2700-49''
Packaging & Shipping
12 Tyre Complete Retreading Line
As a tire retreading equipment specialized manufacturing supplier who providing Turn-Key Service, Rizhao Melion Industry company provides customers with complete solutions all the time,including professional marketing planning,production line procedure analysis,suitable raw materials supply,free technical training and so on.
Complete Tire Retreading Solutions Supply
*Full Set Tire Retreading Equipment
*Precured Tread Rubber materials
*Retreading Accessories and Tools
Melion Team Technical Support *Engineers available to service machinery overseas
Rizhao Melion Industry Co., Ltd As a tire retreading equipment manufacturing supplier who providing Turn-Key Service,Melion provide customers with complete solutions all the time,including professional marketing planing,production line procedure analysis,suitable raw materials supply,free technical training and so on.
We manufacture complete set of retreading tire equipment with different production output from 4 to 24 tyres satisfying different buyer's requirement.Our engineers can go to buyer's factory for help installing and giving technical courses to the workers.With our quality rubber materials of Precured Tread Rubber ,Rubber Strip and Cushion Gum,you are guanranteed to produce quality products of retreaded tyres.
We have had thousands of customers from the world visit us in factory in past more than ten years,and expecting you very soon !
Q: Can you provide complete tire retreading supplies?
A: Yes,we are complete tire retreading solutions supplier who can supply equipment,rubber materials,consumable tools from A to Z.
Q: How long is your delivery time?
A: Generally it is 45 days production time after receive deposit.
Q: Do you provide overseas installation and training service ?
A: Yes, we could send our engineers go to your country for installing and training services.
Q: Can I come to your factory for learning?
A: Welcome for visit any time!
If you have another question, pls feel free to contact us as below: